Fine sanding and polishing often require more than one abrasive grade. Whether you are working on a small DIY project, preparing a surface for finishing or smoothing an existing coating, having several high-grit sandpaper options can make it easier to work through different stages of a project.

The AUSTOR 36 Pieces High Grit Wet and Dry Sandpaper Assortment includes six grit levels: 1500, 2000, 2500, 3000, 5000 and 7000. Each grade comes with six sheets, giving you a selection of fine abrasives for detailed sanding and polishing tasks.

Made with silicon carbide, the sheets measure approximately 9 x 3.6 inches. They are designed for wet or dry use and can be used by hand, with a suitable sanding block or cut into smaller pieces for specific jobs.

Product Overview

AUSTOR’s sandpaper assortment is aimed at users who need fine abrasive grades for surface preparation, smoothing and polishing. The six included grit options provide a progression from 1500 to 7000, allowing you to select a suitable grade depending on the material and the finish you want to achieve.

The sheets use silicon carbide, an abrasive commonly used for fine sanding applications. According to the seller, a fine and uniform abrasive distribution helps the sheets work smoothly during use.

The flexible paper backing is designed to fit comfortably in the hand. You can also place a sheet on a compatible sanding block or trim it to suit smaller areas, curved sections and detailed work.

Key Features

1. Six High Grit Options

The set includes 1500, 2000, 2500, 3000, 5000 and 7000 grit. This range gives users several fine abrasive grades for gradual surface refinement and polishing work. The best starting grit depends on the material, its existing condition and the manufacturer’s finishing recommendations.

2. 36 Sheets in One Assortment

There are six sheets of each grit, making 36 pieces in total. Having multiple sheets of each grade can be useful when working on several projects or when a sheet becomes worn during a task.

3. Silicon Carbide Abrasive

The abrasive material is silicon carbide. The seller describes the abrasive particles as fine and evenly distributed using a nano-sand-planting technique. This is intended to provide a consistent sanding surface for fine finishing applications.

4. Wet and Dry Sanding

The sheets are designed for wet or dry use. The product description mentions use with water, varnish, shellac, lacquer or oil. Always check that the chosen liquid and sanding method are suitable for the material and coating being worked on. Follow the coating manufacturer’s instructions, particularly when sanding finishes.

5. Flexible and Cuttable Sheets

Each sheet measures approximately 9 x 3.6 inches. The flexible backing is suitable for hand sanding, while the sheets can also be cut into smaller shapes for detailed areas. A compatible sanding block can help provide more even pressure on flat surfaces.

6. Multiple Material Applications

The seller lists metal, glass, plastic, stone, jade, leather, lacquer and wood among the intended applications. Results will depend on the material, its hardness, the existing finish and the sanding technique. Test on an inconspicuous area before working on a visible or valuable surface.

Grit Guide and Package Contents

Package contents: 36 sandpaper sheets in total, with six sheets for each of the six grit levels.

Where Can You Use This Sandpaper?

• Metal projects: Fine sanding and surface refinement on suitable metal surfaces.
• Woodworking: Smoothing compatible wood surfaces and preparing selected finishes.
• Glass projects: Fine abrasive work where the material and task are suitable.
• Plastic: Refining selected plastic surfaces, using a careful technique to avoid heat or damage.
• Stone and jade: Fine polishing tasks on appropriate materials.
• Leather: Selected careful finishing applications where sanding is appropriate.
• Paint and lacquer: Fine sanding of compatible coatings when permitted by the coating manufacturer’s instructions.
• DIY and craft work: Small projects that require different fine abrasive grades.

Tips for Better Sanding Results

1. Choose the right grit: Start with a grade appropriate for the material and the current surface condition.
2. Work progressively: Move through suitable grit levels rather than jumping straight to the finest sheet.
3. Use light, even pressure: Avoid pressing too hard, as this can create uneven marks or damage delicate surfaces.
4. Keep the surface clean: Remove sanding residue between stages so loose particles do not scratch the finish.
5. Use water only when suitable: For wet sanding, confirm that the material and coating can safely be sanded with water.
6. Consider a sanding block: A compatible block can help distribute pressure more evenly on flat surfaces.
7. Test first: Try the chosen grit on a hidden or spare section