6PCS Double Flare Tool Adapter Kit for Brake Lines – 3/16″ & 1/4″
Make compatible brake line and tubing preparation easier with this 6PCS Double Flare Tool Adapter Kit. Designed for use with suitable double flaring tools, the set includes adapters for two common sizes: 3/16-inch and 1/4-inch.
Made from 45 steel, these adapters are designed to withstand the pressure involved in suitable flaring operations. Each adapter features a clearly marked size on its face, helping users identify the correct component during workshop tasks.
Product Overview
A double flare adapter is used as part of a compatible flaring tool setup to form a double flare at the end of suitable tubing. This kit provides six adapters in two sizes, making it useful for technicians and experienced DIY users who regularly work with compatible brake lines or tubing.
The set contains four 3/16-inch adapters and two 1/4-inch adapters. The clearly marked sizes help distinguish the adapters, while the 45 steel construction is intended to provide strength and resistance to deformation under suitable working pressure.
Key Features
- 6-Piece Adapter Set: Includes six double flare adapters in two commonly used sizes.
- Two Size Options: Includes 3/16-inch and 1/4-inch adapters for compatible flaring tool systems.
- 45 Steel Construction: Made from 45 steel, selected for its strength and hardness.
- Clearly Marked Sizes: Size markings on the adapter faces help users identify the correct component.
- Designed for Double Flaring: Intended for use with compatible double flaring tools when preparing suitable tubing.
- Workshop Practicality: Multiple adapters provide replacement or additional components for compatible setups.
What’s Included?
- 4 × 3/16-inch double flare tool adapters
- 2 × 1/4-inch double flare tool adapters
- Total: 6 pieces
Adapter Size Information
The supplied dimensions distinguish the two adapter sizes:
| Specification | 3/16-Inch Adapter | 1/4-Inch Adapter |
|---|---|---|
| Quantity | 4 Pieces | 2 Pieces |
| Stated Size | 3/16 Inch | 1/4 Inch |
| Round Base Diameter | 0.55 Inch | 0.63 Inch |
| Small Cylinder Diameter | 0.11 Inch | 0.13 Inch |
Important: Confirm the actual adapter dimensions and the required tubing size for your application before ordering. Do not assume that the stated tubing size alone guarantees compatibility with every flaring tool.
45 Steel Construction
The adapters are made from 45 steel, a material selected for its strength and hardness. The seller describes the material as suitable for handling the pressure involved in flaring operations and as helping resist deformation under uneven stress.
Always inspect each adapter for wear, cracks, damage or deformation before use. A damaged flaring component should not be used, especially when preparing brake system tubing.
Clear Size Markings for Easier Identification
Each adapter has its size marked on the face. These markings are intended to help users identify the component at a glance, reducing the chance of selecting the wrong adapter during a job.
Choosing the correct size is important for forming a suitable flare. Check the markings and confirm the adapter matches the tubing and tool manufacturer’s specifications before starting work.
Typical Applications
- Compatible automotive brake line flaring setups
- Double flaring suitable brake tubing
- Workshop brake line repair and maintenance
- Compatible aluminium or copper tubing applications, where the tubing specification permits
- Replacement or additional adapters for matching double flaring tools
Brake system note: Not every tubing material or brake line uses the same flare type. Confirm the vehicle manufacturer’s required flare specification and tubing material. Do not use an unsuitable flare or fitting on a hydraulic brake system.
Safety and Usage Tips
- Use only with a compatible double flaring tool and the correct adapter.
- Check the tubing material, outside diameter and required flare specification before beginning.
- Inspect adapters and the flaring tool for damage or excessive wear.
- Follow the flaring tool manufacturer’s instructions and use the correct procedure.
- Wear suitable eye protection and keep hands clear of moving or loaded tool components.
- After preparing a brake line, inspect the flare carefully for cracks, uneven surfaces or other defects.
- For vehicle brake repairs, ensure the finished line and connections meet the vehicle manufacturer’s requirements and are leak-tested correctly.
Brake lines are safety-critical components. If you are unsure about the correct flare type, tooling or installation procedure, have the work checked or completed by a qualified automotive technician.
Product Specifications
| Specification | Details |
|---|---|
| Product Type | Double Flare Tool Adapters |
| Package Quantity | 6 Pieces |
| Material | 45 Steel |
| 3/16-Inch Adapters | 4 Pieces |
| 1/4-Inch Adapters | 2 Pieces |
| 3/16-Inch Base Diameter | 0.55 Inch |
| 1/4-Inch Base Diameter | 0.63 Inch |
| Intended Use | Compatible Double Flaring Tool Setups |
Final Thoughts
This 6-piece double flare adapter kit offers a selection of 3/16-inch and 1/4-inch adapters for compatible brake line and tubing flaring tools. With 45 steel construction and clearly marked sizes, it is designed to provide practical replacement or additional components for suitable workshop applications.
Before purchasing, confirm the adapter dimensions, tubing requirements and compatibility with your existing flaring tool. Correct fitment and careful workmanship are especially important when working on hydraulic brake lines.
